Home I About Us I Catalogs I Contact US           
Thompson Fabricating LLC
"Engineered Handrail Systems & Other Fabricated Products for the Water, Wastewater, & Architectural Markets"
Industrial Aluminum Handrail "TUFrail"
Architectural Railing
Access Hatches "TUFhatch"
Ladders "TUFladders"
Grating & Support Systems
Cover Plates
Stop Gates
Catalogs
CAD Drawings


Click Here To Submit A Quote Request Or to Contact Sales

Aluminum Cover Plates Specifications

cover plate

cover plate

Specifications

1) Aluminum checkered floor plates shall be a minimum of 1/4" thick and shall be alloy 6061-T6 or 5086-H112.

2) Floor plates shall be designed to support a uniform load of 200 pounds per square foot with a maximum deflection of 1/4". The maximum fiber stress shall not exceed that which is allowed by the Aluminum Association.

3) The fabricator shall submit calculations to the Engineer along with the submittal drawings. Submittal data will be in enough detail to determine if reinforcing ribs are required and if required, determine rib size, spacing and welding pattern.

4) Paint all aluminum surfaces in contact with concrete or dissimilar metals with a shop coat of bituminous paint.

Download Specifications          Download CAD Drawings

Home I Industrial Handrail I Architectural Railing I Hatches I Fixed Ladders I Cover Plates I Stop Gates I Contact Us